In the past, most public toilets in the world were constructed using traditional brick-and-cement methods, which was a waste of space and were not beautiful enough. The construction cost was not low, and personal privacy was not well protected. Later, the partition construction method was invented and became more and more popular. This beautiful, practical and inexpensive way to build public toilets has been widely recognized by the public, and companies specializing in the construction of public toilets have sprung up. Due to the lack of understanding of this new type of public toilets and the lack of industry standards, and the fierce competition among peers, some people use some shoddy partition fittings in the sanitary partition project, resulting in many public toilets. It needs to be renovated or even rebuilt before the service life is reached, which is a waste of time and money.
At present, the accessories used for public health partitions are mainly made of several materials, including PP, nylon, aluminum alloy, 202 stainless steel, 304 stainless steel, 316 stainless steel and zinc alloy.
Judging from the characteristics of the use of public toilets, there are more general public users, the ground is often wet, acidic urine is easy to corrode the parts that contact the ground, aluminum alloy and 202 stainless steel parts in contact with acidic liquid for a long time, the surface The anti-corrosion ability is not enough, it is easy to produce spots and even mold! 304 stainless steel, 316 stainless steel and zinc alloy are much better than aluminum alloy and 202 stainless steel in terms of corrosion resistance, but 316 stainless steel and zinc alloy accessories are more expensive. If the public toilets with higher requirements, 304 stainless steel accessories are more suitable.
Plastic PP and nylon parts have no major problems in corrosion resistance, and the price is relatively low. But the disadvantage of PP is that it is relatively brittle, especially easy to break under low temperature environment. Due to the large number of users in public toilets, the toilet doors basically use automatic return hinges. When the toilet doors are frequently opened and closed, the PP material hinges are prone to deformation and breakage. In addition, the PP material door locks and handles are also more likely to be damaged. Nylon accessories can avoid the above problems. After nylon accessories are produced, they can absorb moisture in the air to make the accessories more and more tough. The longer the use time, the higher the toughness. There is basically no worries about using nylon accessories. . Because the appearance of PP and nylon accessories is roughly the same, many people lack understanding of this, so some irresponsible engineering companies use PP accessories as nylon accessories to use in the sanitary partition project, which also laid the quality for the project. Hidden danger! The price of PP material accessories on the market is generally more than ten dollars per set, while the real nylon accessories cost thirty to forty dollars per set. For the cost of a sanitary partition, the price difference of twenty dollars is worth the investment. , If you know the PP material accessories and agree to use it, the future results will definitely outweigh the gains!
Therefore, when choosing public health partition accessories, we recommend 304 stainless steel for medium and high-end places. If customers require nylon accessories, it is best to use real nylon accessories. It is best to choose products produced by professional manufacturers with certain brand awareness in the industry.