Ten years ago, most of the public toilet partitions in China still use the traditional brick and cement construction method to build, both waste of space and not beautiful enough and the construction cost is not low. Since the introduction of foreign partition construction, this beautiful, practical, and inexpensive way to build public toilet partitions is widely recognized by the public, professional construction of public toilet partitions companies such as the development of Spring.
As most people do not know enough about this new type of public toilet partition, and the lack of industry standards, coupled with the competition between peers began to be fierce, some people put some shoddy partition fittings to the bathroom partition project, resulting in a lot of public toilet partitions do not reach the use of the life of the need to refurbish, or even re-built, which is a waste of time and a waste of money.As most people do not know enough about this new type of public toilet partition, and the lack of industry standards, coupled with the competition between peers began to be fierce, some people put some shoddy partition fittings to the bathroom partition project, resulting in a lot of public toilet partitions do not reach the use of the life of the need to refurbish, or even re-built, which is a waste of time and a waste of money.
At present, there are several main materials used for public toilet partition fittings, including PP, nylon, aluminum alloy, 202 stainless steel, 304 stainless steel, 316 stainless steel, and zinc alloy. From the use of public bathroom features, public bathrooms are generally more users, the ground is often wet, with acidic urine is easy to corrode and ground contact fittings, aluminum alloy, and 202 stainless steel fittings in contact with acidic liquids for a long time, the surface of the corrosion resistance is not enough, it is very easy to produce spots, and even mildew! 304 stainless steel, 316 stainless steel, and zinc alloy are better than aluminum alloy and 202 stainless steel in terms of corrosion resistance! 304 stainless steel, 316 stainless steel, and zinc alloy in terms of corrosion resistance than aluminum alloy and 202 stainless steel is much better, but 316 stainless steel fittings are more expensive if the requirements of the public bathroom selection of 304 stainless steel or zinc alloy fittings are more appropriate.
Plastic PP and nylon fittings with corrosion resistance do not have a big problem, the price is also relatively inexpensive. But the disadvantage of PP is more brittle, especially in a low-temperature environment is easy to break. Due to the many users of public restrooms, bathroom doors are basically used in the automatic homing hinge, in the frequent opening and closing of the bathroom door PP hinges are prone to deformation and fracture, in addition to the PP material door locks and pulls are also more likely to be damaged, and nylon fittings can avoid the above problems, nylon fittings in the production, through the absorption of moisture in the air, to make the fittings become more and more tough! The longer the use time, the higher the toughness, and the use of nylon fittings is basically no worries. Because the appearance of PP and nylon fittings are roughly the same, many people lack understanding, so there are some irresponsible engineering companies to PP fittings posing as nylon fittings for the bathroom partition project, which also laid the quality of the project is a hidden danger! The price of PP fittings on the market is generally cheap, and the real nylon fittings are much higher, for a bathroom partition cost, is worth investing in, if you know that PP fittings also agreed to use, the future results will certainly outweigh the loss!
Therefore, in the choice of public bathroom partition fittings, we recommend the best choice of 304 stainless steel and zinc alloy fittings for medium and high-end places and the best choice of real nylon fittings for general places.